18sound 12ncx750h Coaxial
From 18 Sound
Recommended retail price
900€
- 18sound 12ncx750h Coaxial - D-KIT 12NCX750 HF
- 18sound 12ncx750h Coaxial - HP 12NCX750 H
- 18sound 12ncx750h Coaxial - R-KIT 12NCX750 LF
Available options
- Description
- Technical specifications
- Notice
COAXIALS Neodymium
12NCX750H Haut-parleur coaxial 12′ (8ohm)
code : ALT120750CX08ND
C’est le HP 12NCX750 équipé d’un horn elliptique 70° x 50°
Options d’achat:
- HP
- R-KIT – Kit remembranage – voir document PDF ‘Recone procedure’
- D-KIT– Kit Diaphragme – voir PDF ‘Diaphragm procedure’
High output neodymium coaxial transducer
Key Features
- 97dB LF / 110 dB HF SPL 1W/1m average sensitivity
- Single magnet neodymium motor
- 800W LF - 240W HF maximum program power handling
- 75 mm (3”) LF Interleaved Sandwich Voice coil (ISV)
- Aluminum demodulating ring (SDR) for minimum LF distortion
- 60 mm (2.4”) HF Titanium diaphragm
- Edge-wound Aluminum ribbon HF voice coil (EWAL)
- HF copper sleeve for reduced distortion and higher output
- 70H x 50V degrees nominal conical dispersion
- Suitable for very compact enclosures and stage monitor
- Proprietary Phase Plug (3P)
LF General Specifications
- Nominal Diameter 300 mm (12 in)
- Rated Impedance 8 Ohm
- AES Power 400 W
- Program Power 800 W
- Peak Power 1600 W
- Sensitivity 97 dB
- Frequency Range 60 ÷ 2800 Hz
- Power Compression @-10dB 0.9 dB
- Power Compression @-3dB 2.8 dB
- Power Compression @Full Power
- 4.2 dB
- Max Recomm. Frequency 1800 Hz
- Recomm. Enclosure Volume 40 ÷ 90 lt. (1,41 ÷ 3,18 cuft)
- Minimum Impedance
- 6.4 Ohm at 25°C
- Max Peak To Peak Excursion 27 mm (1.06 in)
- Voice Coil Diameter 75 mm (2,95 in)
- Voice Coil Winding Material Copper
- Suspension Triple roll, Polycotton
- Cone Curvilinear, Water repellent, High damping pulp
HF General Specifications
- D.C. Resistance 6,1 Ohm
- Continuous Power 120 W
- Max. program power 240W
- Sensitivity 110 dB
- Frequency Range 750 ÷ 18800 Hz
- Min Xover Frequency 1.1 kHz
- Diaphragm Material Titanium
- Voice Coil Diameter 60 mm
- Voice coil winding material Edge-wound aluminum
- Magnet material Neodymium